Videos
VersaDrive Impacta Bohrgewindebohrer Metrisch Grob
VersaDrive Kombi-Bohrgewindebohrer sind eine zeitsparende Lösung zum Pilotbohren und Gewindeschneiden in einem einfachen Arbeitsgang. Die Titanbeschichtung bietet Verschleißfestigkeit und schnellere Schneidleistung.
VersaDrive® Impacta-DrillTaps aus Blech haben einen patentierten, rutschfesten Sechskantschaft, der für den Einsatz in jedem Standard-1/2-Zoll-Bohrfutter für Akku- oder Pistolenbohrer geeignet ist oder mit einem VersaDrive Rapid Lock-Adapter für den Einsatz in einer Vielzahl von Elektrowerkzeugen verwendet werden kann, z als Magnetbohrer.
Empfohlen für die Verwendung mit Schlagschraubern für hohe Produktivität beim Bohren und Gewindeschneiden.
Produkt Vorteile
- Der geschliffene Spiralbohrer schafft das perfekte Kernloch
- Sichereres Klopfen mit minimalem Rückschlag
- Speziell gehärtet für den Einsatz im Schlagschrauber
- Hochwertiger Werkzeugstahl für hohe Genauigkeit und lange Lebensdauer
- Reibungsarme Goldmax-Titanbeschichtung, um das Ausbrennen zu verhindern
- Hochfestes, rutschfestes Schaftdesign
- Bohren und Gewindeschneiden in einem einfachen Vorgang
Kurzanleitung
- Für schnellste Leistung für Schlagschrauber und Schlagschrauber (Mindestdrehmomentanforderung prüfen)
- Die maximale Gewindedicke ist der Gewindedurchmesser des Bohrgewindebohrers
- Das Gewindeschneiden von Edelstahl erfordert ein höheres Schlagmoment
- Verwenden Sie eine geeignete Schmierung und die richtige Drehzahl, um eine lange Lebensdauer des Werkzeugs zu erreichen
VersaDrive DrillTaps
- Impact Taps are recommended for through hole applications only.
- Pilot drill the exact tapping size hole for best results
- Select correct NM torque power for impact wrench applications
- Apply firm, steady feed pressure throughout the cut
- Ensure the Tap is inserted squarely to the hole - misaligned taps will greatly increase the risk of breakage.
- When tapping thicker materials, to speed up the process it is advisable to pilot drill the hole first, before drill-tapping the hole
- Ensure regular application of quality cooling lubricant, especially when drilling thick or hardened materials.
- Hardened or heat-affected materials may require higher torque, reduced RPM and feed rates and extra coolant
- Flame cut/punched holes will require more torque to tap than drilled holes due to heat build up. Caution: Sometimes flame cut holes do not have parallel sides meaning risk of tap breakage.
- Tap the hole in one pass where possible, applying adequate lubrication before you start.
- 301125- Sheet Metal Drill-Taps are intended for tapping material no greater than the tap diameter when driven with an impact wrench
- 301130- Heavy Duty Drill Taps are designed for use with Magnet Drills/Pillar Drills, or for tapping pre-drilled holes with an impact wrench. They are not designed for drill- tapping with hand-held rotary tools
Use the tables below to identify the recommended Nm of Torque or RPM for your hole size and material.
Use Nm of Torque for tapping with Impact tooling.
Use RPM for tapping with Rotary tooling.
N.B. Impact Torque recommendations are the minimum required and for most applications additional torque is a benefit. For Impact applications where Torque values available do not offer an exact match to the table below select the closest available torque setting ABOVE the recommendation.
VersaDrive tooling can be used with a wide range of adapters that allow the products to be used across a variety of drive tools depending on the application required.
Below you will find the recommended adapters for the VersaDrive 301125 DrillTap.
- Identify the torque range (for the cutting tool) required using the data sheet in question 2. (Example M12 in 12mm plate – Guide torque 320Nm)
- Identify the torque range on your impact wrench or impact driver
- Look up model number to see torque range
- Check if there are speed/torque settings on the tool - Example
- Select the closest torque setting on the impact wrench/impact driver ABOVE the torque recommendation
(this is for the following 2 reasons)
- Higher torque will only be used on demand
- Too low torque will lead to the tool jamming or even snapping as the flutes stop cutting and the torque transfers to the tool
N.B. Impact drill-tapping is only recommended for standard 301125 DrillTaps. The larger 301130 Heavy Duty DrillTaps are designed to drill and tap with Magnet Drills and Pillar Drills or for tapping pre-drilled holes with an impact wrench.
